About the blade deviation

First, the cause of blade deviation

Blade deviation is a common problem in the processing process, which may be caused by a variety of factors, such as uneven blade quality, improper machine adjustment, and unskilled operation. This deviation will cause the workpiece to appear rough edges or do not meet the accuracy requirements.

Second, how to adjust to avoid blade deviation

1. Choose high-quality blades: Choosing blades with good quality and stable performance is the basis for avoiding deviation.

2. Machine adjustment:

Ensure that all parts of the machine are tight and stable, especially those in contact with the blade.

Adjust the sharpness and depth of the blade to ensure it is in optimal working condition.

According to the different processing materials, adjust the parameters of the machine, such as speed, feed speed, etc.

3. Operation skills:

Conduct full training and practice before operation to ensure proficiency in the operation process.

Pay attention to observe the processing process, adjust the blade and machine parameters in time.

Avoid deviations caused by human factors, such as shaking hands.

4. Regular inspection and maintenance:

Perform regular maintenance and maintenance on the machine to ensure that the machine is in good condition.

Check the wear of the blade and replace or adjust it in time.

Pay attention to the lubrication of the machine to ensure that all components run smoothly.

5. Environmental factors:

Keep the working environment clean and tidy to avoid dust and debris affecting the processing quality.

Control ambient temperature and humidity to ensure stable machine and blade performance.

Third, measures to avoid burring

1. Use special burring tools and techniques to carry out follow-up treatment on the workpiece.

2. Adjust the speed and feed speed of the blade to make the blade smoother during processing.

3. Choose the appropriate coolant or lubricant to reduce heat and friction during processing and reduce the generation of burrs.

Iv. Summary

Blade deviation is a problem that needs attention, it not only affects the machining quality, but also may cause damage to the machine and the operator. In order to avoid deviation and burr, we should start from the selection of blades, adjust the machine, improve operating skills, regular maintenance and other aspects to ensure the processing process